Water Damage Remediation in Pleasant Prarie, WI 24/7 Emergency Service - Call 262-204-5717

For the majority of surfaces in your home, bleach won't actually get rid of your mold problem. It's the "iceberg effect." Visible mold is usually a small percentage of the actual amount of mold growth. Bleach can't kill mold on porous surfaces like wood, and while tile or fiberglass surfaces can be cleaned with bleach, often the mold has spread far deeper. The reason why mold remediation companies don't recommend DIY cleanup isn't that they want to make more money; they know, in their experience, that a mold problem is usually far more invasive than can be seen with the naked eye. Simply cleaning the surfaces can provide false assurances that you got rid of the mold, only to have it come back time and time again.

Most homeowner's policies cover most water damages, but not all water damages are created equal. There can be a lot of exceptions to coverage depending on the intricacies of your policy. This is why it's a good idea to be familiar with your policy and call your agent right away when damage occurs.

Sometimes mold remediation is included if the cause of the mold was a "covered peril" like a burst hot water heater or water damage caused by firefighters extinguishing a fire in your house. Gradual water damage - like from a leaking pipe or hose - will often cause mold growth, but your insurance coverage will usually not cover that by claiming that it was caused by poor maintenance or neglect. If your insurance company denies your claim, you should request an inspection from a mold remediation company that can help you document the source of the mold.

A good portion of water damage can be prevented by proper household maintenance. Routine plumbing maintenance, as well as sump pump and appliance maintenance, are effective ways to avoid preventable damages. If you live in a cold climate, preparing your home for the winter can also help avoid damage. Finally, it's a good idea to regularly check the exterior of your home, particularly your roof, for damage to ensure water isn't unexpectedly leaking into your home.

Identifying the source of the water damage is one of the first steps in both the insurance claim process and before beginning to dry out and repair the damaged areas. After all, if you replace a sagging, wet ceiling that was caused by a roof leak but don't fix the roof, too, the next rainstorm will start the cycle all over again. The buckling to your hardwood floor could be caused by a leaking pipe. We will pinpoint the exact cause of your water damage and make sure the source is repaired. We make sure your restoration job is done right the first time.

If the inspection/assessment process was able to pinpoint the source and cause of the mold growth, once that source is repaired, you can be relatively confident about the success of remediation. Ask if your restoration technician has the IICRC certification for "Applied Microbial Remediation." You can also request a "post-remediation mold clearance" from a third-party mold inspector to re-test the area for any remaining traces of mold before the area is treated with a sealer or encapsulant to resist future mold growth.

That depends on the types of materials that were affected by water. Drywall, carpet, and hardwood floors will take longer to dry than other materials in the space. We use moisture meters throughout the process and in many different locations to gauge the moisture levels and will continue to adjust our fans and dehumidifiers to achieve an efficient but effective dry time. The bare minimum of "three days to dry" may only produce a surface dry, but can still leave behind moisture levels that create an ideal environment for mold to grow.

It could be. Because mold spores are microscopic and airborne, you'll end up breathing them into your lungs. Depending on the type of mold and how well your immune system functions, you may develop some serious health symptoms that could end up being the result of mold. That's why a mold remediation company takes mold removal so seriously. The space affected by mold is isolated and contained during cleaning so the spores won't spread to other areas of the house, and the remediation team stays suited up in Personal Protective Equipment (PPE) during the process.

Water damage insurance claims depend on a few different criteria. Ultimately, that's a question you'll have to clarify with your insurance company. However, we can tell you that the viability of water damage insurance claims depends primarily on what caused the damage (storm, burst pipe, plumbing malfunction, localized flood, sump pump failure, etc.). Some insurance policies will outline scenarios that will NOT be covered without specific riders like flood insurance, or sump pump failure insurance.

Contacting a restoration contractor as well as your insurance adjuster at the same time is a good idea because the restoration contractor will help make sure that not only will the water extraction and dry out be covered but the rebuild process that should follow. If the full scope of the claim isn't outlined and agreed upon from the start, there may be issues down the line, and property owners may find themselves having to pay out of pocket to get the property completely back to normal.

Most homeowners start trying to remove the water themselves before they realize they'll need to contact their insurance company about a claim so they can call in a water damage restoration company. However, standing water around anything with a power cord or outlet or sagging ceilings makes the area unsafe. Also, many insurance claims require documentation of the loss BEFORE any work is done, including removing the water. Always take plenty of photos of the damage you see before taking any action to start cleaning up the mess. Your restoration contractor will be able to back up your insurance claim scope with the necessary technical documentation as well.